Long term dental transversal stability of Class II division 1 treated with cervical headgear

ABSTRACT Introduction: In several conditions, outcome stability is a great challenge for Orthodontics. Previous studies have reported that relapse commonly occurs along the years after orthodontic treatment finishing. Objective: The aim of the present study was to evaluate in the long-term transversal dental arch changes of Class II division 1 patients treated with cervical headgear and fixed appliance. Methods: Plaster study casts of 20 patients treated with cervical headgear without dental extractions were 3D-scanned and evaluated in three distinct times: initial (T1), immediate post-treatment (T2) and long-term retention (T3 - minimum 20 years). Transversal teeth distance of maxillary and mandibular canines, premolars and first molars were measured. Results: A statistically significant increase during treatment was observed for all maxillary teeth transversal distances (p< 0.05). In turn, a significant reduction was observed in the long term (p<0.05). For the mandibular teeth, canine transversal distance presented statistically significant constriction in the retention period (p<0.05). Mandibular first molars distance was significantly expanded by treatment (p<0.05) and remained stable in the long term. The changes observed for the other teeth or other times were considered not statistically relevant. Conclusions: For the accessed sample, transversal changes occurred during treatment and retention phases in Class II division 1 patients treated with cervical headgear and fixed appliance. Relapse was considered statistically relevant, even with the institution of a retention protocol.

RESUMO Introdução: Em várias condições, a estabilidade dos resultados é um grande desafio para a Ortodontia. Estudos prévios relataram que a recidiva ocorre, comumente, ao longo dos anos, após o término do tratamento ortodôntico. Objetivo: O objetivo da presente pesquisa foi avaliar as alterações transversais da arcada dentária em longo prazo de pacientes Classe II, divisão 1, tratados com aparelho extrabucal cervical e aparelho fixo. Métodos: Modelos de gesso de 20 pacientes tratados com AEB cervical, sem extrações dentárias, foram escaneados e avaliados em três momentos distintos: inicial (T1), pós-tratamento imediato (T2) e acompanhamento de longo prazo (T3, mínimo de 20 anos). A distância transversal entre os caninos superiores e inferiores, pré-molares e primeiros molares foi medida. Resultados: Foi observado aumento estatisticamente significativo durante o tratamento para todas as distâncias transversais dos dentes superiores (p < 0,05). Por sua vez, foi observada redução significativa em longo prazo (p < 0,05). Para os dentes inferiores, a distância transversal intercaninos apresentou constrição estatisticamente significativa no período de contenção (p < 0,05). A distância dos primeiros molares inferiores aumentou significativamente com o tratamento (p < 0,05) e permaneceu estável em longo prazo. As alterações observadas para os outros dentes ou outros tempos foram consideradas sem significância estatística. Conclusões: Para a amostra estudada, as alterações transversais ocorreram durante as fases de tratamento e contenção em pacientes Classe II, divisão 1, tratados com aparelho extrabucal de tração cervical e aparelho fixo. A recidiva foi considerada estatisticamente significativa, mesmo com a instituição de um protocolo de contenção.

Nuevas opciones de aparatos funcionales para tratar pacientes con retrognatismo mandibular / New functional appliance options for treating patients with mandibular retrognathia

RESUMEN Fundamento: El estudio sobre los aparatos actuales de la ortopedia funcional de los maxilares puede aportar nuevos conocimientos para el perfeccionamiento del tratamiento de pacientes con retrognatismo mandibular. Objetivo: Profundizar en los nuevos aparatos de la ortopedia funcional de los maxilares para el tratamiento de pacientes con retrognatismo mandibular. Desarrollo: Se realizó una revisión bibliográfica en las bases de datos SciELO, PubMed, Ebsco, Cumed y Lilacs. En la búsqueda se revisaron 37 artículos, de ellos más del 80 % son de los últimos cinco años. Se identificaron bases teóricas de la ortopedia funcional de los maxilares en el tratamiento de pacientes con retrognatismo mandibular y los aparatos que se utilizan en la actualidad. Conclusiones: Existen nuevas opciones de aparatos funcionales, en su mayoría fijos y clasificados como dentosoportados pasivos, para el tratamiento de pacientes con retrognatismo mandibular.

ABSTRACT Background: The study of the current jaw functional orthopedic appliances can provide new knowledge for the improvement of the patients' treatment with mandibular retrognathia. Objective: To study deeply the current jaw functional orthopedic appliances for the patients' treatment with mandibular retrognathia. Development: A bibliographic review was conducted in the SciELO, PubMed, Ebsco, Cumed and Lilacs databases. A total of 37 articles were reviewed, more than 80 % from the last five years. Theoretical bases on the jaw functional orthopedics in the patients' treatment with mandibular retrognathia and current appliances in use were identified. Conclusions: New functional appliance options, mostly fixed and classified as passive dent supportive, are available for the patients' treatment with mandibular retrognathia.

Treatment of Class II division I malocclusion having severe crowding, proclination with noncomplaint fixed functional appliance therapy, and frictionless mechanics

Our Objective was to treat a patient having proclined, protruded teeth along with a Class II Skeletal malocclusion. 0.022 × 0.028 inch MBT Brackets were placed, and leveling alignment was commenced. Individual canine retraction was carried out in both arches, followed by retraction of the incisors in the upper arch with a Burrstone's T Loop. E2Z Forsus fatigue resistance appliance was given for the correction of Class II malocclusion. Proclination, protrusion, and crowding were corrected along with Class II Skeletal base. Individual canine retraction along with frictionless mechanics and noncompliant functional correction has sufficient potential to prevent anchor loss and correct a Class II skeletal base.

Correção da má oclusão de classe II com propulsor mandibular: revisão de literatura / Correction of class II malocclusion with mandibular trusters: literature review

Introdução: a má oclusão de classe II consiste no desequilíbrio da relação entre as arcadas, podendo ser causada por deficiência mandibular, protrusão maxilar, ou ambas, sendo caracterizada pelo molar inferior distalmente posicionado em relação ao molar superior. Objetivo: este estudo tem o objetivo de apresentar uma revisão de literatura sobre a eficiência dos propulsores mandibulares fixos disponíveis no mercado odontológico no tratamento da má oclusão de classe II. Métodos: a pesquisa foi realizada nas bases de dados Google Acadêmico, SciELO e PubMed, para filtragem dos artigos selecionados. Para revisão de literatura, foram utilizados 17 artigos. Entre os protocolos de tratamento de classe II, esses aparelhos se destacam por serem fixos, por esse motivo, não dependem da colaboração direta do paciente. Com o passar dos anos, os propulsores mandibulares fixos foram cada vez mais aprimorados, oferecendo mais simplicidade na sua instalação e maior conforto ao paciente. Considerações finais: concluiu-se que os aparelhos funcionais propulsores mandibulares fixos são uma ótima escolha para o tratamento compensatório na má oclusão de classe II, sendo eficazes na correção da relação dentária e dependendo de menor cooperação do paciente.(AU)

Introduction: class II malocclusion consists of an imbalance in the relationship between the arches, which can be caused by mandibular deficiency, maxillary protrusion, or both, and is characterized by the mandibular molar distally positioned in relation to the maxillary molar. Objective: this study aims to present a literature review on the efficiency of fixed mandibular thrusters available in the dental market in the treatment of Class II malocclusion. Methods: the research was carried out in the Google Scholar, SciELO and PubMed databases to filter the selected articles. For literature review, 17 articles were used. Among Class II treatment protocols, these devices stand out for being fixed, for this reason, they do not depend on the direct collaboration of the patient. Over the years, fixed mandibular thrusters have been increasingly improved, offering more simplicity in their installation and greater comfort to the patient. Final considerations: it was concluded that the fixed mandibular thrusters functional devices are a great choice for compensatory treatment in Class II malocclusion, being effective in correcting the dental relationship and depending on less patient cooperation.(AU)

Myofunctional therapy using twin block appliance in a class II Malocclusion patient with ADHD

@#A 9-year-old male ADHD patient with class II dentoskeletal malocclusion came to the Pediatric Department of Universitas Airlangga, Surabaya, with a chief complaint of a protrusive look. The patient had a behavior disorder of ADHD (Attention Deficit Hyperactivity Disorder), in which its symptoms may be challenging in dental treatment since it heavily depends on the patient’s obedience and case selection. References and similar studies of myofunctional therapy in Class II Malocclusion Patients with ADHD are still scarce. Most patients with class II malocclusion present with hyperactive perioral muscle and altered tongue position. Hence, myofunctional appliance is a reliable treatment choice. A special rule where the patient was asked to focus on the operator’s instruction for 10 minutes and then a 5-minute break, was applied to this patient to overcome ADHD symptoms as a behavior management strategy. This is in line with a theory stating that children with ADHD are prone to distraction, causing them to have a shorter duration of focus, limited sustained attention span, poor impulse control, and motor overactivity compared to normal children. This strategy gave a positive result in maintaining the cooperation of the patient using the twin block for 6 months which is lead to positive progress in malocclusion correction.

Skeletal Class II Malocclusion Treatment with Combined Twin Block and Lip Bumper Appliances: A Case Report

ABSTRACT@#Functional appliances have been used over a century in clinical orthodontic treatments for skeletal Class II malocclusion patients. Its popularity is attributed to its high patient adaptability and ability to produce rapid treatment changes. The twin block and lip bumper can be combined depending on the patient’s cases. The purpose of therapy with twin block is effective in mandibular growth deficiencies to induce supplementary lengthening of mandibular by stimulating increased growth at the condylar cartilage. The patient was a ten-year-old male patient with skeletal Class II malocclusion. He had a convex facial profile, SNA (sella, nasion, A point) angle of 77.5°, SNB (sella, nasion, B point) angle of 73.0°, ANB (A point, nasion, B point) angle of 4.5°, overjet of 6.5 mm, overbite of 11/41 = 5.0 mm, 21/31 = 4.5 mm, abnormal upper labial frenulum, crossbite in the second left premolar of maxilla, crowded anterior teeth of mandibular, deficiency of mandibular growth, lower lip sucking habit, anterior teeth of maxilla with diastema and proclination. Orthodontic treatment for patient is a combination of twin block and lip bumper appliances. After seven months, frenectomy is used to eliminate and correct the spacing in the frenulum. After 10 months, the patient’s skeletal and profile had improved to skeletal Class I malocclusion, SNA angle of 78.0°, SNB angle of 75.0°, ANB angle of 3.0°, overbite and overjet of 4.0 mm, and the lower lip sucking habit had stopped. Twin block and lip bumper appliances are particularly good alternative treatment in managing selected cases of skeletal Class II malocclusion.

Complications encountered during Forsus Fatigue Resistant Device therapy

ABSTRACT Introduction: Fixed functional appliances are non-compliant solutions to Class II malocclusion treatment. The clinician, however, should be careful of unexpected complications during the therapy. Methods: 58 female adolescents who presented with Class II malocclusion due to deficient mandible were treated with Forsus Fatigue Resistant Device (FFRD) therapy until an overcorrection to an edge to edge incisor relationship was achieved. Results: Incisor relationship and overjet were corrected successfully in all the subjects. Twenty-two patients had a complications-free treatment, while several complications were encountered with the remaining 36 subjects. In particular, mandibular canine rotation and development of posterior crossbites were the most common complications, with percentages of 51.7% and 25.9% respectively. Other complications included the breakage and shearing of the extraoral tubes of the first molar bands, and excessive intrusion of the upper first molars. Conclusions: FFRD is an efficient appliance for treatment of Class II malocclusion; however, different complications were encountered during the appliance therapy. A focus on taking precautions and applying preventive measures can help to avoid such problems, reducing the number of emergency appointments and enhancing the treatment experience with the appliance.

RESUMO Introdução: Os aparelhos funcionais fixos são uma solução para o tratamento da má oclusão de Classe II em pacientes não colaboradores. Porém, o ortodontista deve estar ciente das complicações inesperadas decorrentes do seu uso. Métodos: Cinquenta e oito pacientes adolescentes do sexo feminino com má oclusão de Classe II por deficiência mandibular foram tratadas com o aparelho Forsus FRD até se alcançar uma sobrecorreção, com relação de topo a topo dos incisivos. Resultados: A relação entre os incisivos e a sobressaliência foram corrigidas com sucesso em todas as pacientes. Vinte e duas pacientes não apresentaram complicações durante o tratamento, enquanto as demais trinta e seis pacientes apresentaram diferentes complicações. As complicações mais comuns foram a rotação do canino inferior e o desenvolvimento de mordida cruzada posterior, com prevalência de 51,7% e 25,9%, respectivamente. As demais complicações incluíram quebra e cisalhamento dos tubos extrabucais das bandas dos primeiros molares, e intrusão excessiva dos primeiros molares superiores. Conclusões: O FRD é um aparelho eficiente para o tratamento da má oclusão de Classe II. No entanto, diferentes complicações foram encontradas durante o uso desse aparelho. O foco na tomada de precauções e em medidas preventivas pode ajudar a evitar tais complicações, reduzindo o número de consultas de emergência e melhorando a experiência do paciente no tratamento com esse aparelho.

Different approaches to the treatment of skeletal Class II malocclusion during growth: Bionator versus extraoral appliance

ABSTRACT Introduction: Class II malocclusion, which has a significant incidence in the population, may compromise facial esthetics and the smile, as well as the masticatory and respiratory functions. Often associated with skeletal abnormalities, it severely affects and compromises quality of life. An accurate diagnosis is fundamental to prepare a treatment plan to correct dental and skeletal anomalies. Objectives: This study discusses treatment alternatives to the correction of Class II division 1 and 2 malocclusion in growing patients, using a Bionator and an extraoral appliance.

RESUMO Introdução: A má oclusão de Classe II apresenta uma incidência significativa na população, podendo comprometer a estética facial, o sorriso e as funções mastigatória e respiratória. Frequentemente está associada à alteração esquelética, o que aumenta a repercussão desse comprometimento, interferindo ainda mais na qualidade de vida das pessoas afetadas. O correto diagnóstico dessa condição é fundamental para a elaboração de um plano de tratamento que permita a correção dentária e esquelética. Objetivos: O objetivo do presente artigo é discutir as alternativas terapêuticas para correção da Classe II divisão 1 e 2 em pacientes em fase de crescimento, utilizando-se o Bionator de Balters ou o aparelho extrabucal.

Influencing factors of functional orthopedic appliances on skeletal class Ⅱ malocclusion in adolescents / 口腔疾病防治

@#Functional orthodontics is one of the most important methods in the treatment of skeletal class II malocclusion in adolescents. A deep understanding of the many factors affecting the effect of functional orthopedics can improve the efficiency of correction and achieve good results. In this paper, from the two aspects of patients and appliances, we analyzed the factors that affect the curative effect of class II malocclusion functional orthopedics and deeply analyzed the therapeutic mechanism of functional appliances to guide clinical treatment. The results of the literature review show that the peak period of growth and development is the best period for the treatment of skeletal Class II malocclusion. For patients with a vertical growth type, it is recommended to use a high head cap traction appliance to prevent the lower jaw from rotating backward and downward, and functional appliances such as titanium plates or implant nail-assisted anchorage can effectively reduce the lip inclination of the lower anterior teeth. In addition, compared with the traditional functional appliance, digital and personalized transparent braces are not only more aesthetically pleasing, comfortable and beneficial to periodontal health but also have many orthopedic appliances advantages, such as two-stage fusion, better incisor torque and vertical control of the posterior teeth, and can solve the problems of anterior interference and lateral deficiency while leading. With the development of digital orthodontics, transparent appliances have become an important developmental direction for functional appliances, but there are few related studies, and more clinical studies are needed to confirm their efficacy.

Comparison of Dento-Alveolar and Skeletal Changes Between Immediate and Delayed Placement of Fixed Appliances After Twin Block Therapy

@#Introduction: A parallel design randomized clinical trial was conducted to compare dentoalveolar and skeletal changes in two groups of patients who had completed twin block therapy; one group had a three-month night-time retention period whereas the other group had no retention period, after twin block therapy but before fixed appliances. Methods: 26 participants of Malay ethnicity aged 10 to 15 years were included in the trial and had an overjet of 5mm or greater, molar relationship greater than half cusp Class II on a skeletal Class II base which had been corrected to a Class I molar relationship following twin block therapy. Following randomization, the 26 were divided into two groups of 13. Group A had fixed appliances bonded immediately whereas group B continued wearing twin block at night for three months, after which fixed appliances were bonded. Lateral cephalograms assessed were those taken before randomization, upon twin block therapy completion (T1) and six months after bond-up of fixed appliances (T2). Results: Paired t-test showed several statistically significant dentoalveolar and skeletal changes in group A. In contrast, only condylar head position exhibited a statistically significant change in group B. Despite a statistical significance, changes measured in both groups were minimal at less than 2mm and therefore clinically insignificant. Independent t-test showed no statistically significant difference between the changes recorded in both groups. Conclusion: The results suggest that a three-month night-time retention period after twin block therapy does not lead to any changes that may be considered clinically beneficial.

Consideraciones clínicas en un paciente con hipertonicidad muscular de mentón. Reporte de caso / Clinical considerations in a patient with mint muscle hi-pertonicity. Caso report / Gestão de pacientes adultos com mordida aberta anterior por deglução atípica. Relato de caso

En ortodoncia es de relevante importancia crear una oclusión estéticamente agradable y funcional, además de lograr y preservar el óptimo atractivo facial; es mandatorio realizar un examen facial minucioso porque el equilibrio y la armonía de las diferentes partes de la cara está determinada por los tejidos du-ros y blandos. El objetivo del presente artículo es exponer la importancia de un diagnóstico integral al momento de la plani-ficación del tratamiento. El presente caso, relata el manejo ortodóntico con filosofía Roth de una paciente de 13 años de edad, raza latina, diagnosticada con relación esquelética clase II, proinclinación excesiva de los incisivos en ambos arcos, perfil convexo e hi-pertonicidad del mentón. El plan de tratamiento se planificó para corregir la y la clase II esquelética mediante extracciones de los 4 primeros premolares. Como resultado se eliminó la hipertonicidad muscular, obteniendo una competencia labial adecuada y se mejoró el perfil facial en un tiempo de 18 meses. El mane-jo de este caso resulta exitoso gracias a un diagnóstico correcto y la planifi-ca-ción del caso, permite demostrar que no solo son objetivos ortodónticos las es-tructuras óseas y dentales, sino también aquellos que ayudan a mejorar el per-fil facial del paciente. Fue necesario evaluar la relación de los labios y la barbi-lla ya que estos pueden alterarse con el tratamiento de ortodoncia.

In orthodontics It's of relevant importance to create an aesthetically pleasing and functional occlusion, in addi-tion to achieving and preserving the optimal facial attractiveness; It is mandatory to perform a thorough facial exam because the balance and harmony of the different parts of the face is determined by soft and soft tissues. The objective of this article is to expose the importance of a comprehensive diagnosis at the time of treatment planning. The present case relates the orthodontic management with Roth philosophy of a 13-year-old Latina patient, diagnosed with a class II skeletal relationship, excessive incision of the incisors in both arches, convex profile and chin-hypertonicity. The treatment plan was planned to correct the skeletal class II by extractions of the first 4 premolars. As a result, muscular hypertonicity was eliminated, obtaining adequate lip competence and the facial profile was improved in a period of 18 months. The management of this case is successful thanks to a correct diagnosis and the planning of the case, allows to demonstrate that not only are the bone and dental structures orthodontic objectives, but also those that help improve the patient's facial profile. It was necessary to evaluate the relationship of the lips and chin since these can be altered with orthodontic treatment.

A mordida aberta anterior é uma má oclusão na qual um ou mais dentes não atingem o plano oclusal e não é feito contato com seus antagonistas. Seu tratamento é difícil e há controvérsia na necessidade de uma abord-agem cirúrgica. O presente caso refere-se ao tratamento de uma paciente de 61 anos de idade, atendida na clínica do Instituto Mexicano de Ortodontia, que veio pela "separação dos seus dentes". A avaliação clínica e radiográfica apresentou classe esquelética biprotrusiva I, com sobremordida de -30% com sorriso baixo e não consoante, deglutição atípica como fator etiológico que permitiu o diagnóstico de mordida aberta anterior. O tratamento consistiu na colocação de suportes de prescrição Roth .022 com tubos até os terceiros molares superiores e inferiores, colocando os suportes mais voltados para a gengiva em relação ao centro da coroa anatômica de ambos os arcos para obter extrusão e fechamento da mordida e arco aberto de sorriso; nas centrais a 1,5 mm, laterais a 1 mm e caninos a 0,5 mm. O uso de topes oclusais posteriores e também de elásticos anteriores curtos e leves desde o primeiro dia de tratamento foi essencial. A correção da posição dos dentes foi realizada em um período de 18 meses, o que também induziu uma alteração no padrão da deglutição. Através do plano de tratamento proposto, demonstrou-se que a estabilidade da oclusão pode ser dada e que nem todo paciente com mordida aberta é candidato ao tratamento cirúrgico para correção dessa má oclusão.

Class II malocclusion treatment changes with the Jones jig, Distal jet and First Class appliances

Abstract Objective Maxillary molar distalization with intraoral distalizer appliances is a non-extraction orthodontic treatment used to correct molar relationship in patients with Class II malocclusion presenting maxillary dentoalveolar protrusion and minor skeletal discrepancies. This study compares the changes caused by three distalizers with different force systems. Methodology 71 patients, divided into three groups, were included. The Jones jig group (JJG, n=30; 16 male, 14 female, 13.17 years mean age) was treated with the Jones jig for 0.8 years. The Distal jet group (DJG, n=25; 8 male, 17 female, 12.57 years mean age) was treated with the Distal jet for 1.06 years. The First Class group (FCG, n=16; 6 male, 10 female, 12.84 years mean age) was treated with the First Class for 0.69 years. Intergroup treatment changes were compared using one-way ANOVA, followed by post-hoc Tukey's tests. Results Intergroup comparisons showed significantly greater maxillary incisor protrusion in DJG than in FCG (2.56±2.24 mm vs. 0.74±1.39mm, p=0.015). The maxillary first premolars showed progressive and significantly smaller mesial angulation in JJG, FCG and DJG, respectively (14.65±6.31º, 8.43±3.99º, 0.97±3.16º; p<0.001). They also showed greater mesialization in JJG than FCG (3.76±1.46 mm vs. 2.27±1.47 mm, p=0.010), and greater extrusion in DJG compared to JJG (0.90±0.77 mm vs 0.11±0.60 mm, p=0.004). The maxillary second premolars showed progressive and significantly smaller mesial angulation and mesialization in JJG, FCG and DJG, respectively (12.77±5.78º, 3.20±3.94º, -2.12±3.71º and 3.87±1.34 mm, 2.25±1.40 mm, 1.24±1.26 mm, respectively; p<0.001). DJG showed smaller distal angulation of maxillary first molars (-2.14±5.09º vs. -7.73±4.28º and -6.05±3.76º, for the JJG and FCG, respectively; p<0.001) and greater maxillary second molars extrusion (1.17±1.41 mm vs -0.02±1.16 mm and 0.16±1.40 mm, for the JJG and FCG, respectively; p=0.003). Overjet change was significantly larger in DJG compared to FCG (1.79±1.67 mm vs 0.68±0.84; p=0.046). Treatment time was smaller in FCG (0.69±0.22 years vs 0.81±0.33 years and 1.06±0.42 years, comparing it with the JJG and DJG, respectively; p=0.005). Conclusion The three appliances corrected the Class II molar relationship by dentoalveolar changes. The Distal jet produced smaller molar distal angulation than the Jones jig and First Class. The First Class appliance showed less anchorage loss, greater percentage of distalization and shorter treatment time than the Jones jig and Distal jet.

Orthodontic treatment with passive eruption and mesialization of semi-impacted mandibular third molar in an adult with multiple dental losses

ABSTRACT Objective: This article describes the orthodontic treatment performed on an adult patient with multiple dental losses. Case report: A female patient, 20 years and 4 months old, presented with the following conditions: absence of teeth #26, #35, #36 and #46; semi-impacted tooth #48; inclined molars adjacent to an edentulous space; canines and premolars in a Class II relationship; a convex profile; biprotrusion; and forced lip sealing. Results: Space in the region of tooth #26 was closed, as well the space of tooth #46; tooth #48 erupted and followed mesial movement passively; space of the region of tooth #35 was maintained for the placement of a dental implant; uprighting of tooth #37 was obtained. Aesthetic and functional goals of the treatment were achieved. Results remained stable 10 years after the end of the treatment. Conclusion: The modified helical loop could be effectively used in orthodontic mechanics to close edentulous spaces. Passive semi-impacted mandibular third molar eruption and mesialization can occur in adults when proper space is provided.

RESUMO Objetivo: o presente artigo descreve o tratamento ortodôntico realizado em uma paciente adulta que apresentava múltiplas perdas dentárias. Relato do caso: paciente do sexo feminino com 20 anos e 4 meses de idade, apresentava as seguintes condições: ausência dos dentes #26, #35, #36 e #46; dente #48 semi-impactado; molares adjacentes ao espaço edentado inclinados; relação Classe II de caninos e pré-molares; perfil convexo; biprotrusão; selamento labial forçado. Resultados: foram obtidos o fechamento do espaço da região do dente #26, assim como do #46; o dente #48 irrompeu e acompanhou esse movimento mesial; manutenção do espaço da região do dente #35 para colocação de implante dentário; e verticalização do dente #37. Os objetivos estéticos e funcionais do tratamento foram alcançados. Os resultados alcançados permaneceram estáveis 10 anos após o fim do tratamento. Conclusão: a alça helicoidal modificada pode ser efetivamente usada na mecânica ortodôntica para fechar espaços edêntulos. A erupção passiva e a mesialização de terceiro molar mandibular semi-impactado podem ocorrer em adultos, quando espaço adequado é obtido.

Cervical Extraoral Traction Therapy in Early Treatment of Class II Malocclusion. A systematic review / Terapia de tracción extraoral cervical en el tratamiento temprano de la maloclusión de clase II. Una revisión sistemática / Terapia de Tração Extraoral Cervical no Tratamento Precoce da Maloclusão Classe II. Uma revisão sistemática

Abstract Introduction and objective: Cervical headgear has been used for decades as a treatment of class II malocclusion. Although the effects have been reported previously they are somewhat contradictory. The objective was to determine the available scientific evidence that supports the parameters of clinical use for therapy with cervical extraoral traction in early treatment for class II malocclusion. Materials and methods: A systematic search was conducted using Medline, Google Scholar, Cochrane, and Lilacs data-bases. The search involved articles in English, Spanish, Portuguese, and German using previously selected MeSH terms and free-text terms. The search included articles dealing with cervical extraoral traction treatment, systematic reviews, meta-analysis, clinical trials, and cohort, case-control, and cross-sectional studies. Methodological quality was evaluated using various scales according to the type of study. Results: The search generated 334 articles, 259 were eliminated because they were duplicates, and 34 were eliminated because they did not meet the inclusion criteria. 41 articles were evaluated in full text, 21 were excluded because they did not meet the inclusion criteria, leaving a total of 20 articles. Conclusions: The articles offered varied, yet clear, recommendations. According to the literature and clinical judgment, treatment timing is recommended during the pubertal growth spurt. The most efficient force is 450 to 500g per side for 12 to 14 hours per day. A long outer bow bent 15o degrees upward should be used in patients with normal and hypodivergent patterns. Maxillary growth control depends on age, force, treatment duration, etc. Changes in overjet can be expected due to changes in dental inclination, growth, or the use of additional appliances; an average molar distalization of 1 mm to 2 mm can be achieved.

Resumen Introducción y objetivo: La Tracción cervical se ha utilizado durante décadas como tratamiento para la maloclusión de clase II. Aunque los efectos se han informado previamente, son algo contradictorios. El objetivo fué determinar la evidencia científica disponible que respalde los parámetros de uso clínico para la terapia con tracción extraoral cervical en el tratamiento temprano de la maloclusión de clase II. Materiales y métodos: Se realizó una búsqueda sistemática utilizando las bases de datos Medline, Google Scholar, Cochrane y Lilacs. La búsqueda incluyó artículos en inglés, español, portugués y alemán utilizando términos MeSH previamente seleccionados y términos de texto libre. La búsqueda incluyó artículos relacionados con el tratamiento de tracción extraoral cervical, revisiones sistemáticas, metanálisis, ensayos clínicos y estudios de cohortes, casos y controles y estudios transversales. La calidad metodológica se evaluó utilizando varias escalas según el tipo de estudio. Resultados: La búsqueda generó 334 artículos, 259 fueron eliminados porque eran duplicados y 34 fueron eliminados porque no cumplían con los criterios de inclusión. Se evaluaron 41 artículos en texto completo, se excluyeron 21 porque no cumplían con los criterios de inclusión, dejando un total de 20 artículos. Conclusiones: Los artículos ofrecieron recomendaciones variadas, pero claras. De acuerdo con la literatura y el juicio clínico, se recomienda el momento del tratamiento durante el período de crecimiento puberal. La fuerza más eficiente es de 450 a 500 g por lado durante 12 a 14 horas por día. Se debe usar un arco externo largo doblado 15 grados hacia arriba en pacientes con patrones normales e hipodivergentes. El control del crecimiento maxilar depende de la edad, la fuerza, la duración del tratamiento, etc. Se pueden esperar cambios en la sobrecarga debido a cambios en la inclinación dental, el crecimiento o el uso de aparatos adicionales. Se puede lograr una distalización molar promedio de 1 mm a 2 mm.

Resumo Introdução e objetivo: A tração cervical tem sido utilizada como tratamento da má oclsão de classe II. Embora os efeitos tenham sido relatados anteriormente, eles são contraditórios. O objetivo foi determinar as evidências científicas disponíveis que suportamos parâmetros de uso clínico para terapia com tração extraoral cervical no tratamentoprecoce da má oclusão de classe II. Materiais e métodos: Uma pesquisa sistemática foirealizada usando Medline, Google Scholar, Cochrane e Lilacs. Foram incluidos artigos em inglês, espanhol, português e alemão, usando termos MeSH selecionados anteriormente e termos de texto livre. A pesquisa incluiu artigos que tratavam do tratamento da tração extraoral cervical, revisões sistemáticas, meta-análise, ensaios clínicos e estudos de coorte, caso-controle e transversais. A qualidade metodológica foi avaliada usando várias escalas de acordo com o tipo de estudo. Resultados: a busca gerou 334 artigos, 259 foram eliminados por serem duplicados e 34 foram eliminados por não atenderem aos critérios de inclusão. 41 artigos foram avaliados em texto completo, 21 foram excluídos por não atenderem aos critérios de inclusão, totalizando 20 artigos. Conclusões: Os artigos oferecidos apresentaram recomendações variadas, porém claras. De acordo com a literatura e o julgamento clínico, o momento do tratamento é recomendado durante o surto de crescimento puberal. A força mais eficiente é de 450 a 500g por lado, durante 12 a 14 horas por dia. Um arco externo longo e dobrado de 15 graus deve ser usado em pacientes com padrões normais e hipodivergentes. O controle do crescimento maxilar depende da idade, força, duração do tratamento, etc. Alterações no overjet podem ser esperadas devido a alterações na inclinação dentária, crescimento ou uso de aparelhos adicionais; uma distalização molar média de 1 mm a 2 mm pode ser alcançada.

Myth or Reality - Superstition in Orthodontic Treatment in Rural area of Katihar-Bihar

Background: Orthodontic practice become most challenging when you are practicing in the rural area of the Country. The most common challenge comes when you plan for the extraction and the patient denied due to fear of extraction. The aim of the study is to analyse the causative factor of fear. Methods: The simple random sampling technique were used for the study and a sample size of 110 patient was selected from February 2018 to March 2019, attending the Outpatient Department of Dentistry, Katihar Medical College, Al-Karim University, Katihar, Bihar, India. Results: The study was based on the five questionnaires before the start of treatment. Conclusion: Lack of education, Misconception, Pain during extraction and myth were some of the causative factor respectively the fear of extraction in orthodontic treatment

Atypical Extraction of Maxillary Central Incisor for the Correction of Angle Class II Malocclusion / Extracción Atípica de Incisivo Central Maxilar en la Corrección de la Maloclusión de Angle Clase II

ABSTRACT: This case describes the treatment of Class II malocclusion in a patient missing one of the maxillary central incisors due to traumatic impaction. The treatment approach consisted in the extraction of the remaining maxillary central incisor, followed by diastema closure and re-anatomization of lateral incisors into central incisors. The results obtained were considered satisfactory concerning occlusal, aesthetic and functional aspects. This therapeutic approach may be used as an alternative for similar cases.

RESUMEN: Este caso clínico describe el tratamiento de la mala oclusión de Clase II en un paciente con ausencia de uno de los incisivos centrales superiores debido a impactación. El abordaje del tratamiento consistió en la extracción de este elemento dental y del otro incisivo central, seguido del cierre de los diastemas y reanatomización de los incisivos laterales en incisivos centrales. Los resultados obtenidos fueron considerados satisfactorios con relación a los aspectos oclusales, estéticos y funcionales. Así, esta planificación se puede utilizar como una nueva alternativa de abordaje terapéutico para estos casos.

Biomechanics of extra-alveolar mini-implants

ABSTRACT It is undeniable that extra-alveolar mini-implants anchorage has revolutionized Orthodontics. Correspondingly, the proper understanding of mini-implants biomechanics allowed to broaden the range of dental movements as never seen before in clinical practice. However, in order to produce better treatments, especially regarding the effects in occlusal plane, it is important to be aware of the numerous possibilities of applying force systems based on skeletal anchorage. Thus, this paper aims to address, by means of clinical cases, the application of biomechanics concepts that are extremely relevant to the proper employment of extra-alveolar mini-implants.

RESUMO É inegável que a ancoragem com mini-implantes extra-alveolares revolucionou a nossa especialidade. No mesmo sentido, o correto entendimento da biomecânica com mini-implantes permitiu ampliar a gama de movimentos dentários como nunca visto na prática clínica. Deve-se, porém, atentar às diversas possibilidades dos sistemas de aplicação das forças decorrentes do uso da ancoragem esquelética, com vistas a produzir tratamentos cada vez mais eficientes, principalmente em relação aos efeitos no plano oclusal. Assim, o presente artigo versa, por meio de casos clínicos, sobre a aplicação de conceitos da biomecânica que são extremamente relevantes para o correto emprego dos mini-implantes extra-alveolares.

Superimposition of 3D maxillary digital models using open-source software

Abstract Historically, whether for research purposes or clinical monitoring, orthodontic evaluation of dental movements has been done using plaster study models and two dimensional (2D) radiographs. However, new frontiers for the diagnosis, planning and outcome assessment of orthodontic treatments have arisen, due to the revolutionary digital tools which enable a three dimensional (3D) computerized analysis of dental movements by means of digital models. However, the software for 3D analysis are often costly, resulting in limited access to orthodontists. The present study aims to describe, through a clinical case presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics, a method for the superimposition of maxillary digital models using an open-source software to evaluate dental movements.

Resumo Historicamente, a avaliação ortodôntica da movimentação dentária, seja com finalidade de pesquisa, seja para monitoramento clínico, tem sido feita por meio de modelos de estudo em gesso e radiografias em duas dimensões (2D). Entretanto, com o desenvolvimento da Ortodontia digital, novas fronteiras para o diagnóstico, planejamento e avaliação dos resultados dos tratamentos ortodônticos têm surgido. Os modelos digitais possibilitam uma análise computadorizada da movimentação dentária nas três dimensões (3D); porém, os softwares usados para as análises 3D geralmente são onerosos e de limitado acesso aos clínicos. O presente artigo visa descrever um método de sobreposição de modelos 3D da arcada dentária superior utilizando um software de livre acesso para avaliar a movimentação dentária, ilustrado por um caso clínico apresentado ao Board Brasileiro de Ortodontia e Ortopedia Facial.

Tratamento da Má Oclusão de Classe II assimétrica com propulsor mandibular / Treatment of an asymmetrical Class II malocclusion with mandibular protraction appliance

Introduction: Class II malocclusions have several treatment protocols, and we are increasingly moving towards more conservative orthodontics, avoiding dental extractions whenever possible. A great alternative for treatment in standard II patients has been the use of mandibular protraction appliance, which promote correction of this malocclusion. In the article in question will be reported the use of the Twin Force Bite Corrector appliance in the correction of a unilateral class II. Objective: case report of malocclusion with mandibular propellant. Method: One-phase treatment with the use of a fixed orthodontic appliance associated with a fixed mandibular propulsion orthopedic appliance, Twin Force Bite Corrector (TFBC). Result and Conclusion: The treatment was able to promote the reduction of the overjet, obtaining a stable Class I molar and canine relationship with coincident midlines and the improvement of the soft tissue profile.

Introdução: As más oclusões de classe II apresentam diversos protocolos de tratamento, sendo que a cada dia mais estamos caminhando para uma ortodontia mais conservadora, fugindo sempre que possível de extrações dentárias. Uma ótima alternativa para o tratamento em pacientes padrão II tem sido o uso de propulsores mandibulares, que promovem uma correção dessa má oclusão. No artigo em questão, será relatado o uso do aparelho Twin Force Bite Corrector na correção de uma classe II unilateral. Objetivo: relato de caso de má oclusão com uso de propulsor mandibular. Método: tratamento em uma fase com a utilização de aparelho ortodôntico fixo associado a um aparelho ortopédico fixo de propulsão mandibular, Twin Force Bite Corrector (TFBC). Resultado e Conclusão: O tratamento foi capaz de promover a redução do overjet, obtenção de uma relação Classe I molar e canina estável com linhas médias coincidentes e a melhora do perfil do tecido mole.

Protocolo de Tratamento Orto-Cirúrgico da Má Oclusão de Classe II em paciente com Sindrome da Apnéia e/ou Hipoapnéia Obstrutiva do sono: relato de caso / Ortho-surgical treatment protocol for Class II malocclusion in a patient with obstructive sleep apnea and/or hypopnea syndrome: case report

Introdução: A Síndrome de apnéia e/ou hipopnéia obstrutiva do sono (SAHOS) é caracterizada pela obstrução repetida das vias aéreas ou redução da respiração durante o sono. Esta síndrome é causada por colapso faríngeo contra aumento do esforço espiratório durante o sono. A SAHOS leva à deterioração da qualidade do sono associado à queixa de sonolência diurna excessiva e a efeitos desfavoráveis no sistema cardiovascular. Características orofaciais como retrognatismo mandibular e/ou associado a retrognatismo maxilar, má oclusão de Classe II, com ou sem mordida aberta, e diminuição das vias aéreas orofaríngeas fazem parte do seu quadro. Objetivo: Relato do tratamento ortocirúrgico de um paciente com 31 anos de idade com caraterísticas de SAHOS, má oclusão de Classe II, deficiência mandibular, mordida cruzada posterior e aberta anterior, diminuição da altura facial anteroinferior, aprofundamento do sulco mentolabial, pouca exposição do lábio inferior e nítido desequilíbrio facial. Relato e Resultados: Tratamentos não invasivos para SAHOS passam pelos dispositivos de pressão nasal contínua positiva nas vias aéreas ou aparelhos intra-bucais com o objetivo de manter a mandíbula em posição anteriorizada durante o sono. Nos tratamentos invasivos, a cirurgia de avanço mandibular evita a rotação no sentido anti-horário do complexo maxilomandibular com aumento do espaço orofaríngeo das vias aéreas médias e inferiores. Nas situações com grande impacto esquelético dentofacial associado ao grau de obstrução das vias aéreas será necessário um tratamento descompensatório ortocirúrgico, permitindo assim um restabelecimento respiratório e estético da face. Conclusão: O tratamento descompensatório com avanço cirúrgico bimaxilar foi responsável pela correção da má oclusão e aumento do espaço aéreo, contemplando a expectativa respiratória, funcional e estética.

Introduction: Obstructive sleep apnea and/or hypopnea syndrome (OSAHS) is characterized by repeated obstruction of the airway or reduction of breathing during sleep. This syndrome is caused by pharyngeal collapse against increased respiratory effort during sleep. SAHOS leads to deterioration of sleep quality associated with clinical complaints of excessive daytime sleepiness and unfavorable effects on the cardiovascular system. Orofacial features such as mandibular retrognathism and/or associated maxillary retrognathism, Class II malocclusion, with or without open bite and reduction of the oropharyngeal airway characterize this syndrome. Objective: It is reported an orthosurgical treatment of a 31 years old male patient, with OSAHS characteristics, Class II malocclusion, mandibular deficiency, posterior crossbite and anterior open bite, lower anterior facial height decrease, deepening of the labial sulcus, little exposure of the lower lip and unbalanced face. Report and Results: Non-invasive treatments for OSAHS pass through positive continuous nasal pressure devices in the airways or intra-oral appliances in order to maintain the mandible in an anterior position during sleep. In the invasive treatments protocol, mandibular advancement surgery prevents rotation in the anti-clockwise direction of the maxillomandibular complex with an increase in the oropharyngeal space of the middle and lower airways. In cases with great skeletal dentofacial impact associated with the degree of obstruction of the airway will be necessary an ortho-surgical decompensatory treatment, to allow a respiratory and aesthetic restoration of the face. Conclusion: The decompensatory treatment with bimaxillary surgical advancement corrected the malocclusion, increasing the air space contemplating the respiratory, functional and aesthetic expectation.